全功能接觸電流測試器

產品型號： 7630

所屬分類：耐壓測試儀,安規測試儀

產品時間：2024-05-06

簡要描述：量測頻寬 DC - 1MHz *符合 IEC60990 接觸電流測試規范

詳細說明：


可與華儀電子的安規測試器連結；組成安規六合一（ACW/DCW/IR/GB/RUN/LLT）測試系統
	超大型 320 x 240 Graphic LCD ，可同時顯示量測電壓/接觸電流及測試時間

	量測頻寬 DC - 1MHz *符合 IEC60990 接觸電流測試規范

	可量測zui大峰值 75mApeak / 有效值 35mArms，滿足安規機構測試驗證需求（選配）

	內建 7 組人體模擬阻抗（MD）且可擴充一組，一臺儀器就可以滿足多種安規標準要求

	MD具有BNC量測端子，可外接示波器或電壓表讀取MD電壓值，方便對MD進行校準

	人體模擬阻抗（MD）的校準方式，可以*符合IEC60990標準規定進行

	可靈活選擇MD漏電流量測點（如: IEC60065 U1&U2）；符合安規標準要求

	負載zui大容量為 10KVA / 40Arms，允許啟動瞬間承受 250Apeak 不切斷保護

	可選配產品電氣性能量測模塊（RUN Test Module），可量測功率/電壓/電流/功率因子

	可選配多功能界面卡內含USB-A數據收集功能，內部記憶可儲存至少10萬筆的測試結果

INPUT
Voltage		115/230 VAC ± 15%
Frequency		50/60 Hz ± 5%
Fuse		2A Slow-Blo 250V AC
Line condition
Power Switch		Reverse polarity switch for normal condition （on / off / auto setting）
Neutral Switch		Neutral switch on/off selection for single fault condition
Ground Switch		Ground switch on/off selection for class I single fault condition
Probe Setting
Surface to Surface （PH- PL）
Surface to Line（PH - L）
Ground to Line （G - L）
Ground to Neutral （G - N）
Auto Function （G - N & G - L）
SETTING
Touch Current High Limit （RMS）	Range:	0.0uA~ 999.9uA/ 1000uA~5999uA/ 6.00mA~20.00mA
	Resolution:	0.1uA/1uA/0.01mA
Touch Current Low Limit （RMS）	Range:	0.0-999.9 uA
	Resolution:	0.1uA
Touch Current High Limit （Peak）	Range:	0.0uA - 999.9uA/ 1000uA - 9999uA/ 10.0mA - 30.0mA
	Resolution:	0.1uA/1uA/0.1mA
Touch Current Low Limit （Peak）	Range:	0.0-999.9 uA
	Resolution:	0.1uA
DISPLAY
Touch Current Display （RMS）	Range 1	0.0uA~ 999.9uA, frequency DC - 1MHz
	Resolution	0.1uA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f <100KHz : ±2% of reading + 3counts 100KHz < f < 1MHZ : ±5% of reading （10.0uA - 999.9uA）
	Range 2	1000uA~8500uA, frequency DC - 1MHz
	Resolution	1uA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f <100KHZ : ±2% of reading + 3counts 100KHz < f <1MHZ : ±5% of reading （10uA - 8500uA）
	Range 3	8.00mA~20.00mA, frequency DC - 1MHz
	Resolution	0.01mA
	Accuracy	DC : ±2% of reading + 3counts 15Hz < f < 1MHz : ±5% of reading （0.01mA -20.00mA ）
Touch Current Display （Peak）	Range 1	0.0uA~ 999.9uA, frequency DC - 1MHz
	Resolution	0.1uA
	Accuracy	DC : ±2% of reading +2uA 15Hz < f <1MHZ : ±10% of reading +2uA
	Range 2	1000uA ~ 8500uA, frequency DC - 1MHz
	Resolution	1uA
	Accuracy	DC : ±2% of reading +2counts 15Hz < f <1MHz : ±10% of reading +2counts
	Range 3	8.0mA ~ 30.0mA, frequency DC - 100KHz
	Resolution	0.01mA
	Accuracy	DC : ±2% of reading +2counts 15Hz < f < 100KHz : ±10% of reading +2counts
Measuring Device Module
MD1		IEC60990 Fig4 U2, IEC 60950-1, IEC60335-1, IEC60598-1, IEC60065, IEC61010
		IEC60990 Fig4 U1, IEC60065
MD2		IEC60990 Fig5 U3, IEC60598-1
		IEC60990 Fig5 U1
MD3		IEC 60601-1
MD4		UL544NP, UL484 , UL923, UL471, UL867, UL697
MD5		UL544P
MD6		UL1563
MD7		IEC60950, IEC61010-1 FigA.2 （2K ohm） for RUN Test MD Circuit.
External MD		Basic measuring element 1k ohm
MD Voltage Limit		70Vdc
Leakage Current Offset	Range:	0 - 999.9uA
	Resolution:	0.1uA
DUT POWER
AC Voltage		0.0-277.0V
AC Current		40Arms max continuous
Over Current Protection		50Arms, Response Time < 3 sec / 250Apeak Response Time <10u sec
AC Voltage High/Low Limit	Range:	0.0-277.0V
	Resolution:	0.1V/step
AC Voltage Display	Range:	0.0 - 277.0 V
	Resolution:	0.1 volt / step
	Accuracy:	±（1.5% of reading + 2 counts） , 30.0 - 277.0VAC
Delay time setting	Range:	0.2 !V 999.9 seconds
	Resolution:	0.1 second
Timer display	Range:	0.0 !V 999.9 seconds
	Resolution:	0.1 second
	Accuracy:	± （0.1% of reading + 0.05 seconds）
GENERAL
PLC Remote Control		Input - Test, Reset, Interlock & Recall File 1 through10
		Output - Pass, Fail, Test-in-Process, Start-Out, Reset-Out
Scanner Control		It is applied to control Matrix Scanner （Model 7006）
Memory		50 memories , 30steps per each memory . Max. Result Display 900 data （30 memories x 30 steps）
Auto Reverse Function		AUTO Reverse ON / OFF parameter setting selection Automatic Reverse polarity switch for normal condition in one step setting menu. Only display maximum leakage current value.
Scope Output Interface		At rear panel BNC type to connet scope for some IEC standards test requirement and application.
Display		320 X 240 graphic LCD
LCD Contrast Setting		Range: 1-9; 1 is lightest character, 9 is darkest character.
Alarm Volume Setting		Range: 0-9; 0=OFF, 1 is softest volume, 9 is loudest volume.
Security		Lockout capability to avoid unauthorized access to test set-up programs.
Calibration		Software and adjustments are made through front panel, Automatic Calibration alert function to signal operator when calibration is due.
Results Display		All test result information will be displayed on the screen.
Interface		RS232 standard
Safety		Product with TUV/GS certificate
Dimension		430 （W） x 133（H） x 300 （D） mm
Weight		12 Kg
STANDARD ACCESSORIES
Power Cord		X1
Fuses		X2 （Including a spare contained in the fuse holder）
Interlock Disable Key（1505）		X1
TC Receptacle Adaptor Box （1932）		X1
Hipot Test Lead for PH / PL （1101）		X2
RS232 Link Cable 1.5m（1130）		X1
DUT Power Cable 40A（1148）		X1
RUN Module （Opt.752）
W		Range : 0-1KW / 1-10KW Resolution : 0.5W / 5W
A		Range : 0.000 !V 3.500 A / 3.00 - 40.00A , Resolution : 0.001A / 0.01A
PF		0.000 -1.000
Leakage Current		Range : 0.00 - 10.00mA , Resolution : 0.01mA
AC Current High/Low Limit Setting	Range:	0-40A
	Resolution:	0.01A/step
AC Current Display	Range:	0.000 !V 3.500 A / 3.00 - 40.00A
	Resolution:	0.001A / 0.01A
	Accuracy :	± （2 % of reading + 5 counts） / ± （2 % of reading + 2 counts）
AC Power High/Low Limit Setting	Range:	0 - 10KW
	Resolution:	1W
AC Power Display	Range:	0.0 -1000.0W / 1000 - 10000W
	Resolution:	0.5W / 5W
	Accuracy :	±（2 % of reading + 2 counts ）
Power Factor High/Low Limit Setting	Range:	0.000 - 1.000
	Resolution:	0.001
Power Factor Display	Range:	0.000 - 1.000
	Resolution:	0.001
	Accuracy :	± （2 % of reading + 2 counts ）
Leakage Current High/Low Limit Setting	Range:	0.00 - 10.00mA
	Resolution:	0.01mA
Leakage Current Display	Range:	0.00 - 10.00mA
	Resolution:	0.01mA
	Accuracy :	± （2 % of reading + 2 counts ）
Delay Timer Setting	Range:	0, 0.2 - 999.9
	Resolution:	0.1
Dwell Timer Setting	Range:	0, 0.1-999.9 （0=continuous）
	Resolution:	0.1
Timer display	Range:	0.0 - 999.9 seconds
	Resolution:	0.1 second
	Accuracy:	± （0.1% of reading + 0.05 seconds）
Power Control		It is applied to control Transformer Box （1931/1931S） or AC Power Source（6700/6800/6400 Series）
HV & GB Link Module （Opt. 753）
Max. ACW 4000VAC, DCW 4000VDC & Max. Ground Bond 40A
GPIB Interface Card （Opt. 731）
Printer Port Interface Card （Opt. 732）
Multi-function Interface Card （Opt. 751）
Including USB port A type, combination of RS-232, RS-485 port, and Bar Code Input with internal memory capability.
High Measurement Range 35mArms / 70mApeak & 4MDs （Opt. 754 ）
35mArms / 70mApeak for IEC60990 fig4（U1 and U2）, IEC60990 fig5（U1 and U3）, UL484, IEC60601 Test Requiremt , Notice : Option this MD circuit have to replace MD module all MD circuits .
Transformer Box （Option） Add this option must optional Opt.752 RUN Module.
1931 Series Transformer Box （500VA/ 1KVA/1.8KVA/3.6KVA）		Multi-Tape of 1.0, 1.06, 1.1 times of input voltage.
1931-S Series Transformer Box （500VA/ 1KVA/1.8KVA/3.6KVA）		Multi-Tape of 0.8, 0.85, 0.9, 1.0, 1.06, 1.1 times of input voltage.
AC Power Source （Option） Add this option must optional Opt.752 RUN Module.
6800 Series Digital AC Power Source （6805, 6810 , 6820 , 6830 and 6840 ）
6700 Series Programmable AC Power Source （6705, 6710 , 6720 , 6730 and 6740 ）
6400 Series AC Power Source （6402, 6403, 6405, 6410 ）

全功能接觸電流測試器

留言框

產品：

您的單位：

您的姓名：

聯系電話：

常用郵箱：

省份：

詳細地址：

補充說明：

驗證碼：